• -33%
  • CAIS ENZO 3B CANTILEVER GATE KIT
  • CAIS ENZO 3B CANTILEVER GATE KIT
  • CAIS ENZO 3B CANTILEVER GATE KIT
  • CAIS ENZO 3B CANTILEVER GATE KIT
  • CAIS ENZO 3B CANTILEVER GATE KIT
  • CAIS ENZO 3B CANTILEVER GATE KIT

CANTILEVER GATE KIT UP TO 6M 450KG (2x3m) RAW

CAIS ENZO 3B CANTILEVER GATE KIT
£373.97 (Includes VAT at 20%) Save 33%
RRP £558.17 (Includes VAT at 20%

Small Cantilever Gate Kit for openings up to 4.5m or 450kg. 2x3m Raw Steel Monorails

  • Cantilever Gate Kit
  • 450kg Max leaf weight
  • STAGE S Monorail Suits openings up to 6m
  • RAW Finish
  • Tracked supplied in 2 X 3M lengths
Quantity

100% secure payments
 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
0 / 5
Average : 0 / 5
Based on 0 customer reviews.

CANTILEVER GATE KIT UP TO 6M 450KG (2x3m) RAW

Complete Hardware kit for a cantilever sliding gate in a galvanised steel finish. The track and carriages supplied in this kit are suitable for openings up to 4.5m or 450kg maximum. The STAGE S monorail is rated for openings up to 6m.

  • check_boxEASY ASSEMBLY
  • check_boxFAST NO WELDING REQUIRED
  • check_box15 BOLTS 15 RIVET NUTS INCLUDED (*)
  • check_box«C» TRACK SERIAL NO. 100% COMPATIBILITY CARRIAGE TESTED
  • check_boxGERMAN STEEL
  • check_boxARROW STRAIGHT «C» TRACK
  • check_boxSLOTTED HOLE PUNCHED EVERY 400MM IN TRACK
  • check_boxMADE IN CZECH REPUBLIC
  • check_boxC 2 HIGH QUALITY BEARINGS
  • check_boxCARRIAGES CENTER HOLES MILLED NOT LASER CUT
  • check_boxMULTI RIVETED SECTIONS
  • check_boxJAPANESE ROBOTICS FANUC
  • check_boxUNIVERSITY OF TECHNOLOGY – BRNO
  • check_box- 37°C TESTED & PROVEN
  • check_box+ 50°C TESTED & PROVEN
  • check_boxNO WELDING REQUIRED
What comes in the box
ImageQuantityItem
2 SPEED S Carriages
2 STAGE SB 3 3m Monorails
2 RUN S Guide Wheels
2 LAST S End Stops
2 PILOT SN End Caps

*Monorail in this kit is not supplied in Galvanised Finish. See Galvanised Kit!

Kit Reference Finish Track Max Weight Max Opening Range
cais ENZO 3B KIT RAW 2 X 3M 4500mm 450kg Small
cais ENZO 6B KIT RAW 6M 4500mm 450kg Small
cais ENZO 3Z KIT GALV 2 X 3M 4500mm 450kg Small
cais ENZO 6Z KIT GALV 6M 4500mm 450kg Small
cais DEMO 3B KIT RAW 3 X 3M 8000mm 700kg Medium
cais DEMO 6B KIT RAW 6M + 3M 8000mm 700kg Medium
cais DEMO 3Z KIT GALV 3 X 3M 8000mm 700kg Medium
cais DEMO 6Z KIT GALV 6M + 3M 8000mm 700kg Medium
cais FERO 3B KIT RAW 4 X 3M 13500mm 1200kg Large
cais FERO 6B KIT RAW 2 X 6M 13500mm 1200kg Large
CAIS ENZO 3B CANTILEVER GATE KIT

Data sheet

Shipping Index
Hardware 3m
Finish
RAW
Max weight per gate
450kg
Max length per gate
4500mm
Track Range
Small
Category
Cantilever Gate Kit

Download

Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.