• -19.41%
  • CAIS DEMO 3Z CANTILEVER GATE KIT
  • CAIS DEMO 3Z CANTILEVER GATE KIT
  • CAIS DEMO 3Z CANTILEVER GATE KIT
  • CAIS DEMO 3Z CANTILEVER GATE KIT
  • CAIS DEMO 3Z CANTILEVER GATE KIT
  • CAIS DEMO 3Z CANTILEVER GATE KIT

CANTILEVER GATE KIT UP TO 8M 700KG (3x3m) GALVANISED

CAIS DEMO 3Z CANTILEVER GATE KIT
£989.50 (Includes VAT at 20%) Save 19.41%
RRP £1,227.86 (Includes VAT at 20%

Medium Cantilever Gate Kit up to 8m or 700kg. Galv. 3x3m Monorails

  • Cantilever Gate Kit
  • 700kg Max leaf weight
  • STAGE M Monorail Suits openings up to 8m
  • GALV Finish
  • Tracked supplied in 3 X 3M lengths
Quantity
FREE SHIPPING (MAINLAND UK)

100% secure payments

CANTILEVER GATE KIT UP TO 8M 700KG (3x3m) GALVANISED

Complete Hardware kit for a cantilever sliding gate in a raw steel finish. The track and carriages supplied in this kit are suitable for openings up to 8m or 700kg maximum. The STAGE M monorail is rated for openings up to 8m.

  • check_boxEASY ASSEMBLY
  • check_boxFAST NO WELDING REQUIRED
  • check_box15 BOLTS 15 RIVET NUTS INCLUDED (*)
  • check_box«C» TRACK SERIAL NO. 100% COMPATIBILITY CARRIAGE TESTED
  • check_boxGERMAN STEEL
  • check_boxARROW STRAIGHT «C» TRACK
  • check_boxSLOTTED HOLE PUNCHED EVERY 400MM IN TRACK
  • check_boxMADE IN CZECH REPUBLIC
  • check_boxC 2 HIGH QUALITY BEARINGS
  • check_boxCARRIAGES CENTER HOLES MILLED NOT LASER CUT
  • check_boxMULTI RIVETED SECTIONS
  • check_boxJAPANESE ROBOTICS FANUC
  • check_boxUNIVERSITY OF TECHNOLOGY – BRNO
  • check_box- 37°C TESTED & PROVEN
  • check_box+ 50°C TESTED & PROVEN
  • check_boxNO WELDING REQUIRED
What comes in the box
ImageQuantityItem
2 SPEED M Carriages
3 STAGE MZ 3 3m Monorails
2 RUN M Guide Wheels
2 LAST M End Stops
2 PILOT MN End Caps

Kit Reference Finish Track Max Weight Max Opening Range
cais ENZO 3B KIT RAW 2 X 3M 4500mm 450kg Small
cais ENZO 6B KIT RAW 6M 4500mm 450kg Small
cais ENZO 3Z KIT GALV 2 X 3M 4500mm 450kg Small
cais ENZO 6Z KIT GALV 6M 4500mm 450kg Small
cais DEMO 3B KIT RAW 3 X 3M 8000mm 700kg Medium
cais DEMO 6B KIT RAW 6M + 3M 8000mm 700kg Medium
cais DEMO 3Z KIT GALV 3 X 3M 8000mm 700kg Medium
cais DEMO 6Z KIT GALV 6M + 3M 8000mm 700kg Medium
cais FERO 3B KIT RAW 4 X 3M 13500mm 1200kg Large
cais FERO 6B KIT RAW 2 X 6M 13500mm 1200kg Large
CAIS DEMO 3Z CANTILEVER GATE KIT

Data sheet

Shipping Index
1
Finish
GALV
Max weight per gate
700kg
Max length per gate
8000mm
Track Range
Medium
Category
Cantilever Gate Kit

You might also like

Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.