• -41.03%


£1,237.68 (Includes VAT at 20%) Save 41.03%
RRP £2,098.94 (Includes VAT at 20%
Twin gate kit. 24v. Max 2000mm. 300Kg. Per gate.
  • swing gate kit
  • Twin gate kit
  • 24v Intensive
  • 2000mm or 300kg Max each leaf
  • Above ground Motor
  • 110 degrees Max opening angle
  • Opening and closing hydraulic lock
  • Speed 14 seconds 90 Degrees
  • Built-In Obstacle Detection
BFT Battery backup
Choose Options

100% secure payments


Complete kit for a pair of residential industrial collective or tertiary swing gates up to a maximum of 2m in width or 300kg in weight each leaf.

Strong & Durable Hydraulic Motor

Most powerful motor for the largest gates. More durable with fewer moving parts and can easily be repaired by replacing the seals and the oil. Motor can be back in service for years to come.

Battery Backup Available

Battery backup is available for this motor for in the event of a mains power failure. Electric gates make it particularly difficult to gain access to a property if the mains power fails.

Slow Down on Open and Close

With this equipment you can adjust the speed of your gate as it approaches the open and closed positions. Further improving on the overall installation and provides a personallised and refined touch to each application.

Integrated Open & Close Limits

This equipment features adjustable open and close limits. This allows you to set the gates limits of travel without the need for a physical stop in the ground. This feature has some limitiations and may not function correctly on wider gates. For gates where each leaf is over 2.5m we reccomend a physical stop in the open and close positions.

LCD Display

Control Panel with LCD display for simplified programming.

Intensive Use

The motor is specifically designed for intensive use. Enjoy the comfort of an electric gate that can open and close for numerous visitors throughout the day. Particularly useful for shared entrance gates to a large number of residences.

Suitable for Close-Boarded Wooden Gates

Recommended by the manufacturer to be used on close or fully boarded wooden gates. This equipment has been purposely designed to accommodate for the heavy wind loading experienced when gates are close boarded. An electric lock can improve the longevity of a motors lifespan on an installation of this nature.

Built in obstacle detection

This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person or a vehicle or an object or even wind obstructing the path of the gate. Although this safety feature can be very effective it is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.

Quick & Easy Installation

Equipment designed for the quick & easy installation to existing hinged swing gates. Can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board & low voltage cabling to the motors.

Solar Ready

This equipment can be solar powered. Whether you are looking for a low cost eco-friendly installation or want to cut down the cost of installation by removing the need to excavate for mains power or you simply cant get mains power to the gate for whatever reason. This equipment is the ideal choice.

What comes in the box
2BFT GIUNO ULTRA BT A20 24v Motor's
1BFT THALIA P Control Panel
2BFT Mitto RB 2 Button Transmitter's
1BFT Compacta Pair of safety photocells
1BFT Antenna
Motor ModelMains Power SupplyMotor VoltageMax Weight per GateMax Length per GateLocking MethodGate SpeedMax Opening AngleNotesKITSINGLE KIT
BFT GIUNO ULTRA BT A20230v24v300kg2000mmOpening and closing hydraulic lock14 seconds 90 Degrees110 degreesBFT GIUNO ULTRA BT A20 KITBFT GIUNO ULTRA BT A20 KIT S
BFT GIUNO ULTRA BT A50230v24v800kg5000mmOpening and closing hydraulic lock20 seconds 90 Degrees110 degreesBFT GIUNO ULTRA BT A50 KITBFT GIUNO ULTRA BT A50 KIT S

Data sheet

Shipping Index
Gate type
Swing gate
Single or twin kit
Twin gate kit
Gate Style
Max weight per gate
Max length per gate
Max C Dimension
Post Configuration
corner hung, side hung, front hung
Above or underground
Above ground
Max opening angle
110 degrees
Locking method
Opening and closing hydraulic lock
Power Supply Voltage
Motor voltage
Gate Speed
14 seconds 90 Degrees
Duty Cycle
Stops Required
Obstacle Detection
Built-In Obstacle Detection
Motor Range
Swing Gate Kit

Specific References




Bft Giuno Decleration of Conformity

Download (383.23k)


Bft Giuno Product Brochure

Download (4.67M)


Bft Giuno Ultra Bt Manual

Download (5.91M)
Product Options
Access Control
Push Button
Push to exit button
Q.BO Keyswitch
Key switch
Q.BO Wireless Keypad
Wireless keypad
Additional Security
BFT EPB 24v Lock + Transformer
Electric Drop Lock
Cisa Lock
CISA ElettriKa
ECB Vertical Rigel 6
Vertical ECB Lock
BFT Battery backup
Bft BBT-BAT Battery Backup
Battery Backup
Safety Lights & Accessories (Select up to 4 options)
LED Flashing Light with Antenna 230v
LED Flashing Light with Antenna 230v
LED Flashing Light with Antenna 24v
LED Flashing Light with Antenna 24v
Wall Mounting Bracket
Wall Mounting Bracket
Select which Photocells come in the kit
Bft Akta
Bft Akta
Bft Compacta
Bft Compacta
Bft Eris
Bft Eris
Bft Thea
Bft Thea
Seav 2241
Seav 2241
Select which Remotes come in the kit
Standard 2 Button Remotes
Upgrade to 2 Button Kleio
Upgrade to 4 Button Blue
Upgrade to 4 Button Ice
Upgrade to 4 button Kleio
Aluminium Photocell Columns
Aluminium Photocell Columns (Pair)
BFT Smartphone Connectivity
Wifi Module
Wifi Module
Wifi Module for Smartphone App

You might also like

Submit a site survey

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.