- Audio Intercom Kit
- GSM Lite
- Videx 4000 series
- Supplied with psu and antenna
Complete kit for a pair of residential industrial collective or tertiary swing gates up to a maximum of 2m in width or 300kg in weight each leaf.
Most powerful motor for the largest gates. More durable with fewer moving parts and can easily be repaired by replacing the seals and the oil. Motor can be back in service for years to come.
Battery backup is available for this motor for in the event of a mains power failure. Electric gates make it particularly difficult to gain access to a property if the mains power fails.
With this equipment you can adjust the speed of your gate as it approaches the open and closed positions. Further improving on the overall installation and provides a personallised and refined touch to each application.
This equipment features adjustable open and close limits. This allows you to set the gates limits of travel without the need for a physical stop in the ground. This feature has some limitiations and may not function correctly on wider gates. For gates where each leaf is over 2.5m we reccomend a physical stop in the open and close positions.
Control Panel with LCD display for simplified programming.
The motor is specifically designed for intensive use. Enjoy the comfort of an electric gate that can open and close for numerous visitors throughout the day. Particularly useful for shared entrance gates to a large number of residences.
Recommended by the manufacturer to be used on close or fully boarded wooden gates. This equipment has been purposely designed to accommodate for the heavy wind loading experienced when gates are close boarded. An electric lock can improve the longevity of a motors lifespan on an installation of this nature.
This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person or a vehicle or an object or even wind obstructing the path of the gate. Although this safety feature can be very effective it is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.
Equipment designed for the quick & easy installation to existing hinged swing gates. Can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board & low voltage cabling to the motors.
This equipment can be solar powered. Whether you are looking for a low cost eco-friendly installation or want to cut down the cost of installation by removing the need to excavate for mains power or you simply cant get mains power to the gate for whatever reason. This equipment is the ideal choice.
|What comes in the box|
|2||BFT GIUNO ULTRA BT A20 24v Motor's|
|1||BFT THALIA P Control Panel|
|2||BFT Mitto RB 2 Button Transmitter's|
|1||BFT Compacta Pair of safety photocells|
|Motor Model||Mains Power Supply||Motor Voltage||Max Weight per Gate||Max Length per Gate||Locking Method||Gate Speed||Max Opening Angle||Notes||KIT||SINGLE KIT|
|BFT GIUNO ULTRA BT A20||230v||24v||300kg||2000mm||Opening and closing hydraulic lock||14 seconds 90 Degrees||110 degrees||BFT GIUNO ULTRA BT A20 KIT||BFT GIUNO ULTRA BT A20 KIT S|
|BFT GIUNO ULTRA BT A50||230v||24v||800kg||5000mm||Opening and closing hydraulic lock||20 seconds 90 Degrees||110 degrees||BFT GIUNO ULTRA BT A50 KIT||BFT GIUNO ULTRA BT A50 KIT S|
You might also like
Exterior Push Button IP56