- -35%

*Shipping is estimated for England
Complete kit for a pair of swing gates up to 3000mm or 300kg per gate. High Speed operation.
Battery backup is available for this motor for in the event of a mains power failure. Electric gates make it particularly difficult to gain access to a property if the mains power fails.
This underground equipment is specifically designed so that the motor is concealed in a load bearing foundation box beneath the pivot point of your hinged swing gates. Giving you the very best in aesthetics while further reducing hazards by removing more trapping points above ground level.
This equipment features adjustable open and close limits. This allows you to set the gates limits of travel without the need for a physical stop in the ground. This feature has some limitiations and may not function correctly on wider gates. For gates where each leaf is over 2.5m we reccomend a physical stop in the open and close positions.
Control Panel has Bus terminals for the connection of photocells and accessories with a easy 2-wire Non-polarised wiring system. Speeds up the installation by preventing errors during installation. Can be connected as desired i.e serial parallel etc.
With this equipment you can adjust the speed of your gate as it approaches the open and closed positions. Further improving on the overall installation and provides a personallised and refined touch to each application.
Manual release from outside the property in the event of a power failure or fault. Particularly useful when the gate is the only means of access to the property.
This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person or a vehicle or an object or even wind obstructing the path of the gate. Although this safety feature can be very effective it is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.
This equipment can be solar powered. Whether you are looking for a low cost eco-friendly installation or want to cut down the cost of installation by removing the need to excavate for mains power or you simply cant get mains power to the gate for whatever reason. This equipment is the ideal choice.
What comes in the box | |
---|---|
Quantity | Item |
2 | NICE MFAB3024HS 24v Motor's |
2 | NICE MFABBOX Foundation Case's |
2 | NICE ON2E 2 Button Transmitter's |
1 | NICE MC824H Control Panel |
1 | NICE EPMB Pair of Photocell's |
1 | NICE OXI Receiver |
2 | NICE MEA3 Release Mechanism's |
Motor Model | Mains Power Supply | Motor Voltage | Max Weight per Gate | Max Length per Gate | Locking Method | Motor | Gate Speed | Duty Cycle | Notes | KIT | SINGLE KIT |
NICE SFAB2024 | 230v | 24v | 400kg | 2300mm | Mechanically locking motor | Electromechanical | 15 seconds 90 Degrees | Intensive | |||
NICE SFAB2124 | 230v | 24v | 400kg | 2300mm | Mechanically locking motor | Electromechanical | 15 seconds 90 Degrees | Intensive | Encoder | ||
NICE MFAB3000 | 230v | 600kg | 3000mm | Mechanically locking motor | Electromechanical | 13 seconds 90 Degrees | Semi-intensive | ||||
NICE MFAB3000L | 230v | 600kg | 3000mm | Mechanically locking motor | Electromechanical | 18 seconds 90 Degrees | Semi-intensive | For Larger Leafs | |||
NICE MFAB3024 | 24v | 600kg | 3000mm | Mechanically locking motor | Electromechanical | 11 seconds 90 Degrees | Intensive | ||||
NICE MFAB3024HS | 24v | 600kg | 3000mm | Mechanically locking motor | Electromechanical | 6 seconds 90 Degrees | Intensive | Hi-Speed | NICE M-FAB3024HS-DKIT | ||
NICE LFAB4000 | 230v | 650kg | 4000mm | Mechanically locking motor | Electromechanical | 24 seconds 90 Degrees | Semi-intensive | ||||
NICE LFAB4024 | 24v | 650kg | 4000mm | Mechanically locking motor | Electromechanical | 18 seconds 90 Degrees | Semi-intensive | NICE L-FAB4024-DKIT | |||
NICE LFAB4024HS | 230v | 24v | 400kg | 4000mm | Mechanically locking motor | Electromechanical | 6 seconds 90 Degrees | Intensive | Hi Speed | ||
NICE BFAB5024 | 24v | 900kg | 5000mm | Mechanically locking motor | Electromechanical | 24 seconds 90 Degrees | Semi-intensive | NICE B-FAB5024-DKIT |
Data sheet
Specific References
No reviews at this time.