- Digital lock both sides
- Bolt on
Delivery & Return policy
Complete kit for a sliding gate up to 500kg per gate. High Speed operation.
Battery backup is available for this motor for in the event of a mains power failure. Electric gates make it particularly difficult to gain access to a property if the mains power fails.
This equipment features adjustable open and close limits. This allows you to set the gates limits of travel without the need for a physical stop in the ground.
Control Panel has Bus terminals for the connection of photocells and accessories with a easy 2-wire Non-polarised wiring system. Speeds up the installation by preventing errors during installation. Can be connected as desired i.e serial parallel etc.
With this equipment you can adjust the speed of your gate as it approaches the open and closed positions. Further improving on the overall installation and provides a personallised and refined touch to each application.
This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person or a vehicle or an object or even wind obstructing the path of the gate. Although this safety feature can be very effective it is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.
This equipment can be solar powered. Whether you are looking for a low cost eco-friendly installation or want to cut down the cost of installation by removing the need to excavate for mains power or you simply cant get mains power to the gate for whatever reason. This equipment is the ideal choice.
|What comes in the box|
|1||NICE RUN400HS 24v Motor|
|2||NICE ON2E 2 Button Transmitter's|
|1||NICE EPMB Pair of Photocell's|
|1||NICE OXI Receiver|
|Motor Model||Mains Power Supply||Motor Voltage||Max Weight per Gate||Max Length per Gate||Locking Method||Motor||Gate Speed||Duty Cycle||Notes||KIT||SINGLE KIT|
|NICE RB400||230v||24v||400kg||Mechanically locking motor||Electromechanical||20 m/min||Intensive||NICE ROBUS-400-BDKCE KIT|
|NICE RB600||230v||24v||600kg||Mechanically locking motor||Electromechanical||18 m/min||Intensive||NICE ROBUS-600-KIT|
|NICE RB600P||230v||24v||600kg||Mechanically locking motor||Electromechanical||18 m/min||Intensive||Magnetic Limits||NICE ROBUS-600P-KIT|
|NICE RB1000||230v||24v||1000kg||Mechanically locking motor||Electromechanical||16 m/min||Intensive||NICE ROBUS-1000-KIT|
|NICE RB1000P||230v||24v||1000kg||Mechanically locking motor||Electromechanical||16 m/min||Intensive||Magnetic Limits||NICE ROBUS-1000P-KIT|
|NICE RB500HS||230v||24v||500kg||Mechanically locking motor||Electromechanical||26 m/min||Intensive||Hi-Speed||NICE ROBUS 500 HS KIT|
Weld on Toothed Drive Rack 1m.