FTL-P KIT Swing Gate Kit

Twin gate kit. 24v. Max 2000mm. 200kg. Per gate. EN Tested.

Swing Gate Kit
Twin gate kit
24v Intensive
2000mm or 200kg Max each leaf
Above ground Motor
110 Degrees Max opening angle
Mechanically locking motor
Speed Adjustable
Built-In Obstacle Detection

CAME FTL-P KIT

Complete kit for a pair of residential or condominium applications on small and medium-sized pillars for swing gates up to a maximum of 2m in width or 200kg in weight each leaf

Battery Backup Available

Battery backup is available for this motor for in the event of a mains power failure. Electric gates make it particularly difficult to gain access to a property if the mains power fails.

Slow Down on Open and Close

With this equipment you can adjust the speed of your gate as it approaches the open and closed positions. Further improving on the overall installation and provides a personallised and refined touch to each application.

Designed for large pillars

Especially designed for gates with large square pillars. The articulated arm can easily reach around the corner of the gates pillar without the need to modify any of the bracketry that is normally supplied with other equipment.

Intensive Use

The motor is specifically designed for intensive use. Enjoy the comfort of an electric gate that can open and close for numerous visitors throughout the day. Particularly useful for shared entrance gates to a large number of residences.

Built in obstacle detection

This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person a vehicle an object or even wind obstructing the path of the gate. Although this safety feature can be very effective. It is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.

Quick & Easy Installation

Equipment designed for the quick & easy installation to existing hinged swing gates. Can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board & low voltage cabling to the motors

Solar Ready

This equipment can be solar powered. Whether you are looking for a low cost eco-friendly installation. Want to cut down the cost of installation by removing the need to excavate for mains power or you simply cant get mains power to the gate for whatever reason. This equipment is the ideal choice.

What comes in the box
Quantity	Item
1	CAME FTL20DGC 24v Motor with Control Panel - 801MB-0080
1	CAME FTL20DGS 24v Motor - 801MB-0050
1	CAME AF43S Frequency Card 433MHz
1	CAME DIR-10 Pair of safety photocells
2	CAME TOPD4FKS Four Channel Black Radio Remote's - 806TS-0102
1	CAME TOP-A433N Antenna

Motor Model	Mains Power Supply	Motor Voltage	Max Weight per Gate	Max Length per Gate	Locking Method	Motor	Gate Speed	Duty Cycle	Notes	KIT	SINGLE KIT
CAME FTL20DGC - 801MB-0080		24v	200kg	2000mm	Mechanically locking motor	Electromechanical	Adjustable	Intensive	Lite Line.	CAME FTL-P KIT
CAME FTX20DGS - 801MB-0050		24v	200kg	2000mm	Mechanically locking motor	Electromechanical	Adjustable	Intensive	Slave motor.
CAME FTX20DLC - 801MB-0110		24v	250kg	2000mm	Mechanically locking motor	Electromechanical	Adjustable	Intensive	Master Motor with Control Board Included.	CAME FTX-P KIT	CAME FTX-S KIT
CAME FTX20DLS - 801MB-0120		24v	250kg	2000mm	Mechanically locking motor	Electromechanical	Adjustable	Intensive	Slave motor.