- -40%

Complete kit for a pair of residential or condominium applications on medium and large-sized pillars for swing gates up to a maximum of 2300mm in width or 300kg in weight each leaf
With this equipment you can adjust the speed of your gate as it approaches the open and closed positions. Further improving on the overall installation and provides a personallised and refined touch to each application.
Control Panel with LCD display for simplified programming.
Especially designed for gates with large square pillars. The articulated arm can easily reach around the corner of the gates pillar without the need to modify any of the bracketry that is normally supplied with other equipment.
This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person a vehicle an object or even wind obstructing the path of the gate. Although this safety feature can be very effective. It is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.
Equipment designed for the quick & easy installation to existing hinged swing gates.
Enjoy all the functionality of your CAME devices using a cloud based service. Monitor your video entry system from wherever you are via the internet. On smartphone you can receive audio/video calls from your entry panel and open your gate remotely using the XIP mobile app. Available on the App Store and Google Play.
Battery backup is available for this motor for in the event of a mains power failure. Electric gates make it particularly difficult to gain access to a property if the mains power fails.
Equipment designed for the quick & easy installation to existing hinged swing gates. Can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board & low voltage cabling to the motors
RIO System needs no hard wiring between the control unit and safety accessories speeding up installation time.This is ideal for bringing any existing system up to code. The control unit is linked to the operators control panel while the other modules communicate with the unit via radio.
The motor is specifically designed for intensive use. Enjoy the comfort of an electric gate that can open and close for numerous visitors throughout the day. Particularly useful for shared entrance gates to a large number of residences.
What comes in the box | |
---|---|
Quantity | Item |
1 | CAME FST23DLC 230v Motor with Control Panel - 801MB-0090 |
1 | CAME FST23DLS 230v Motor - 801MB-0100 |
1 | CAME AF43S Frequency Card 433MHz |
1 | CAME DIR-10 Pair of safety photocells |
2 | CAME TOPD4RKS Four Channel Black Radio Remote's - 806TS-0122 |
1 | CAME TOP-A433N Antenna |
Motor Model | Mains Power Supply | Motor Voltage | Max Weight per Gate | Max Length per Gate | Locking Method | Motor | Gate Speed | Duty Cycle | Notes | KIT | SINGLE KIT |
CAME FA70230CB | 230v | 300kg | 2300mm | Mechanically locking motor | Electromechanical | 15 seconds 90 Degrees | 30 cycles/hour | Master Motor with Control Board Included. | CAME FAST70-P KIT | CAME FAST70-S KIT | |
CAME FA70230 | 230v | 300kg | 2300mm | Mechanically locking motor | Electromechanical | 15 seconds 90 Degrees | 30 cycles/hour | Slave motor. | CAME FAST70-P KIT | ||
CAME FST23DLC - 801MB-0090 | 24v | 300kg | 2300mm | Mechanically locking motor | Electromechanical | Adjustable | Intensive | Master Motor with Control Board Included. | CAME FAST70-P24 KIT | CAME FAST70-S24 KIT | |
CAME FST23DLS - 801MB-0100 | 24v | 300kg | 2300mm | Mechanically locking motor | Electromechanical | Adjustable | Intensive | Slave motor. | CAME FAST70-P24 KIT |
Data sheet
Specific References
No reviews at this time.