S418 KIT S
  • S418 KIT S


S418 KIT S
£976.37 (Includes VAT at 20%)
Single gate kit. 24v. Max 2700mm. 500kg. Per gate.
  • Swing Gate Kit
  • Single gate kit
  • 24v Very-intensive
  • 2700mm or 500kg Max each leaf
  • Above ground Motor
  • 110 Degrees Max opening angle
  • Mechanically locking motor
  • Speed 15 seconds 90 Degrees
  • Built-In Obstacle Detection
Select which Remotes come in the Kit
Choose Options

100% secure payments


Complete kit for a single residential swing gate up to a maximum of 2.7m each leaf.

Integrated Open & Close Limits

This equipment features adjustable open and close limits. This allows you to set the gates limits of travel without the need for a physical stop in the ground. This feature has some limitiations and may not function correctly on wider gates. If your gates are over 1.8m in width it is advisable to talk to us before ordering if this feature is critical to your installation.

Built in obstacle detection

This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person a vehicle an object or even wind obstructing the path of the gate. Although this safety feature can be very effective. It is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.

Quick & Easy Installation

Equipment designed for the quick & easy installation to existing hinged swing gates. Can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board & low voltage cabling to the motors

Bus Connection for Peripherals

Control Panel has Bus terminals for the connection of photocells and accessories with a easy 2-wire Non-polarised wiring system. Speeds up the installation by preventing errors during installation. Can be connected as desired. Serial/Parallel etc.

What comes in the box
1FAAC S418 24v DC Operator
1FAAC E124 Control Board
1FAAC XF 868 SLH Receiver
2FAAC 868 SLH 2 Channel Transmitter's
1FAAC XP 20B D Pair of Photocells
Motor ModelMains Power SupplyMotor VoltageMax Weight per GateMax Length per GateLocking MethodMotorGate SpeedDuty CycleNotesKITSINGLE KIT
FAAC S418 24v 104301230v24v500kg2700mmMechanically locking motorElectromechanical15 seconds 90 DegreesVery-intensiveObstacle Detection.FAAC S418 KITFAAC S418 KIT S
S418 KIT S

Data sheet

Shipping Index
Gate type
Swing gate
Single or twin kit
Single gate kit
Max weight per gate
Max length per gate
Above or underground
Above ground
Max opening angle
110 degrees
Locking method
Mechanically locking motor
Power Supply Voltage
Motor voltage
Gate Speed
15 seconds 90 Degrees
Duty Cycle
Obstacle Detection
Built-In Obstacle Detection
Protection Rating
IP 54
Swing Gate Kit

Specific References

Product Options
Additional Security
12 V Electric Lock with Pilaster
12 V Electric Lock with Pilaster
Select which Photocells come in the kit
XP 20B D
XP 20B D
Standard 20m
XP 20W D
XP 20W D
Battery TX
XP 30B
XP 30B
Metal 30m
Battery Backup
Battery Backup - for E124
Battery Backup - for E124
XKP Radio Keypad
XKP Radio Keypad
Photocell Accessories
100m Roll of 6 Core Bus Cable 0.5mm
100m Roll of 6 Core Bus Cable 0.5mm
One Aluminium Photocell Column
One Aluminium Photocell Column
Two Aluminium Photocell Columns
Two Aluminium Photocell Columns
Safety Warning Light(s)
FAACLight 24v
FAACLight 24v
Select which Remotes come in the Kit
24 Hour 7 Day Timer - 6 Event Times
24 Hour 7 Day Timer - 6 Event Times
Submit a site survey

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.