770 UK KIT
  • 770 UK KIT

FAAC 770 UK KIT

770 UK KIT
£1,835.03 (Includes VAT at 20%)
Twin gate kit. 230v. Max 3500mm. 500kg. Per gate.
  • Swing Gate Kit
  • Twin gate kit
  • 230v 20 cycles/hour
  • 3500mm or 500kg Max each leaf
  • Underground Motor
  • 110 Degrees Max opening angle
  • Mechanically locking motor
  • Speed 15 seconds 90 Degrees
Select which Remotes come in the Kit
Quantity
Choose Options

100% secure payments
 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
0 / 5
Average : 0 / 5
Based on 0 customer reviews.

FAAC 770 UK KIT

Complete kit for a pair of residential swing gates up to a maximum of 3.5m each leaf.

Ultimate Choice in Aesthetical Appearance

This underground equipment is specifically designed so that the motor is concealed in a load bearing foundation box beneath the pivot point of your hinged swing gates Giving you the very best in aesthetics while further reducing hazards by removing more trapping points above ground level.

LCD Display

Control Panel with LCD display for simplified programming.

What comes in the box
QuantityItem
2FAAC 770N 230v Operator's
2FAAC Underground Foundation Box's
1FAAC 455D Control Board
1FAAC Control Board Housing
1FAAC 868 SLH Plug in receiver/decoder
2FAAC 868 SLH 2 Channel Transmitter's
1FAAC XP 20 D Pair of Photocells
Motor ModelMains Power SupplyMotor VoltageMax Weight per GateMax Length per GateLocking MethodMotorGate SpeedDuty CycleNotesKITSINGLE KIT
FAAC 770N 10675201230v230v500kg3500mmMechanically locking motorElectromechanical15 seconds 90 Degrees20 cycles/hourFAAC 770 UK KITFAAC 770 UK KIT S
FAAC 770N 24V 10675301230v24v500kg3500mmMechanically locking motorElectromechanical15 seconds 90 DegreesVery-intensiveObstacle Detection.FAAC 770 24V KITFAAC 770 24V KIT S
770 UK KIT
2017-01-01

Data sheet

Shipping Index
General
Gate type
Swing gate
Single or twin kit
Twin gate kit
Max weight per gate
500kg
Max length per gate
3500mm
Above or underground
Underground
Max opening angle
110 degrees
Motor
Electromechanical
Locking method
Mechanically locking motor
Power Supply Voltage
230v
Motor voltage
230v
Gate Speed
15 seconds 90 Degrees
Duty Cycle
20 cycles/hour
Protection Rating
IP 67
Motor Range
770
Category
Swing Gate Kit

Specific References

UPC
643570389306
Product Options
Additional Security
12 V Electric Lock
 
12 V Electric Lock
 
Select which Photocells come in the kit
XP 20 D
 
XP 20 D
 
Standard 20m
XP 20W D
 
XP 20W D
 
Battery TX
XP 30
 
XP 30
 
XP 30 METAL
 
XP 30 METAL
 
Metal 30m
Keypad
XKP Radio Keypad
 
XKP Radio Keypad
 
Photocell Accessories
One Aluminium Photocell Column
 
One Aluminium Photocell Column
 
Two Aluminium Photocell Columns
 
Two Aluminium Photocell Columns
 
Safety Warning Light(s)
FAACLight
 
FAACLight
 
Select which Remotes come in the Kit
XT2-BLK
 
 
XT2-WHT
 
 
XT4-BLK
 
 
XT4-WHT
 
 
Timer
24 Hour 7 Day Timer - 6 Event Times
 
24 Hour 7 Day Timer - 6 Event Times
 
Upgrade the Control Panel
455 D
 
455 D
 
E145
 
E145
 
E145 + 2x SAFECODER (770N)
 
E145 + 2x SAFECODER (770N)
 
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.