S800 CBAC KIT-100 Swing Gate Kit

Twin gate kit. 24v. Max 2000mm. 800kg. Per gate.

Swing Gate Kit
Twin gate kit
24v Very-intensive
2000mm or 800kg Max each leaf
Underground Motor
100 Degrees Max opening angle
Opening and closing hydraulic lock
Speed 11 seconds 90 Degrees

FAAC S800 CBAC KIT-100

Complete kit for a pair of residential and light commercial swing gates up to a maximum of 2m each leaf with Opening & Closing Hydraulic Lock. 100 Degree Opening. Intensive Use.

Strong & Durable Hydraulic Motor

Most powerful motor for the largest gates. More durable with fewer moving parts. Can easily be repaired by replacing the seals and the oil. Motor can be back in service for years to come.

Ultimate Choice in Aesthetical Appearance

This underground equipment is specifically designed so that the motor is concealed in a load bearing foundation box beneath the pivot point of your hinged swing gates Giving you the very best in aesthetics while further reducing hazards by removing more trapping points above ground level.

Integrated Open & Close Limits

This equipment features adjustable open and close limits. This allows you to set the gates limits of travel without the need for a physical stop in the ground. This feature has some limitiations and may not function correctly on wider gates. If your gates are over 1.8m in width it is advisable to talk to us before ordering if this feature is critical to your installation.

LCD Display

Control Panel with LCD display for simplified programming.

Bus Connection for Peripherals

Control Panel has Bus terminals for the connection of photocells and accessories with a easy 2-wire Non-polarised wiring system. Speeds up the installation by preventing errors during installation. Can be connected as desired. Serial/Parallel etc.

Intensive Use

The motor is specifically designed for intensive use. Enjoy the comfort of an electric gate that can open and close for numerous visitors throughout the day. Particularly useful for shared entrance gates to a large number of residences.

Built in obstacle detection

This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person a vehicle an object or even wind obstructing the path of the gate. Although this safety feature can be very effective. It is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.

3 Year Warranty

To support our confidence in FAAC we offer a 3 year warranty on all FAAC electrical components.

FROM JUNE 2020! This Kit is now supplied with the manual release lever instead of the hydraulic release system. This change was requested by Faac customers and now has been implemented across all S800 CBAC Kits.

FAAC 390878

What comes in the box
Quantity	Item
2	FAAC S800H CBAC 100 Degree 24v DC Operator's
2	FAAC Release lever 390878
2	FAAC Underground Foundation Box's
1	FAAC E124 Control Board
1	FAAC XF 868 SLH Receiver
2	FAAC 868 SLH 2 Channel Transmitter's
1	FAAC XP 20B D Pair of Photocells

Motor Model	Mains Power Supply	Motor Voltage	Max Weight per Gate	Max Length per Gate	Locking Method	Motor	Gate Speed	Duty Cycle	Notes	KIT	SINGLE KIT
FAAC S800H E CBAC 100 108720	230v	24v	800kg	2000mm	Opening and closing hydraulic lock	Hydraulic	11 seconds 90 Degrees	Very-intensive		FAAC S800 CBAC KIT-100	FAAC S800 CBAC KIT S-100
FAAC S800H E CBAC 180 108722	230v	24v	800kg	2000mm	Opening and closing hydraulic lock	Hydraulic	11 seconds 90 Degrees	Very-intensive		FAAC S800 CBAC KIT-180	FAAC S800 CBAC KIT S-180
FAAC S800H E SBW 100 108724	230v	24v	800kg	4000mm	Requires solenoid lock	Hydraulic	11 seconds 90 Degrees	Very-intensive		FAAC S800 SBW KIT-100	FAAC S800 SBW KIT S-100
FAAC S800H E SBW 180 108725	230v	24v	800kg	4000mm	Requires solenoid lock	Hydraulic	11 seconds 90 Degrees	Very-intensive		FAAC S800 SBW KIT-180	FAAC S800 SBW KIT S-180
FAAC S800 230V CBAC 100 1088002	230v	230v	800kg	2000mm	Opening and closing hydraulic lock	Hydraulic	12 seconds 90 Degrees	Semi-intensive		FAAC S800 CBAC 230V KIT-100	FAAC S800 CBAC 230V KIT S-100
FAAC S800 230V CBAC 180 1088012	230v	230v	800kg	2000mm	Opening and closing hydraulic lock	Hydraulic	12 seconds 90 Degrees	Semi-intensive		FAAC S800 CBAC 230V KIT-180	FAAC S800 CBAC 230V KIT S-180
FAAC S800 230V SBW 100 1088022	230v	230v	800kg	4000mm	Requires solenoid lock	Hydraulic	12 seconds 90 Degrees	Semi-intensive		FAAC S800 SBW 230V KIT-100	FAAC S800 SBW 230V KIT S-100
FAAC S800 230V SBW 180 1088032	230v	230v	800kg	4000mm	Requires solenoid lock	Hydraulic	12 seconds 90 Degrees	Semi-intensive		FAAC S800 SBW 230V KIT-180	FAAC S800 SBW 230V KIT S-180
FAAC S800 230V E CBAC 100 108800	230v	230v	800kg	2000mm	Opening and closing hydraulic lock	Hydraulic	12 seconds 90 Degrees	Semi-intensive		FAAC S800 ENC CBAC 230V KIT-100	FAAC S800 ENC CBAC 230V KIT S-100
FAAC S800 230V E CBAC 180 108801	230v	230v	800kg	2000mm	Opening and closing hydraulic lock	Hydraulic	12 seconds 90 Degrees	Semi-intensive		FAAC S800 ENC CBAC 230V KIT-180	FAAC S800 ENC CBAC 230V KIT S-180
FAAC S800 230V E SBW 100 108802	230v	230v	800kg	4000mm	Requires solenoid lock	Hydraulic	12 seconds 90 Degrees	Semi-intensive		FAAC S800 ENC SBW 230V KIT-100	FAAC S800 ENC SBW 230V KIT S-100
FAAC S800 230V E SBW 180 108803	230v	230v	800kg	4000mm	Requires solenoid lock	Hydraulic	12 seconds 90 Degrees	Semi-intensive		FAAC S800 ENC SBW 230V KIT-180	FAAC S800 ENC SBW 230V KIT S-180