C720 UK KIT
  • C720 UK KIT

FAAC C720 UK KIT

C720 UK KIT
£961.44 (Includes VAT at 20%)
Sliding gate kit. 24v. Max 400kg. Per gate.
  • Sliding Gate Kit
  • 24v Very-intensive Use
  • 400kg Max leaf weight
  • Electromechanical
  • Speed 18 m/min
  • Built-In Obstacle Detection
Select which Remotes come in the Kit
Quantity
Choose Options

100% secure payments
 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
5.0 / 5
Average : 5.0 / 5
Based on 1 customer reviews.

FAAC C720 UK KIT

Complete kit for a residential sliding gate up to a maximum of 400kg in weight each leaf.

Bus Connection for Peripherals

Control Panel has Bus terminals for the connection of photocells and accessories with a easy 2-wire Non-polarised wiring system. Speeds up the installation by preventing errors during installation. Can be connected as desired. Serial/Parallel etc.

Intensive Use

The motor is specifically designed for intensive use. Enjoy the comfort of an electric gate that can open and close for numerous visitors throughout the day. Particularly useful for shared entrance gates to a large number of residences.

Built in obstacle detection

This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person a vehicle an object or even wind obstructing the path of the gate. Although this safety feature can be very effective. It is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.

Integrated Open & Close Limits

This equipment features adjustable open and close limits. This allows you to set the gates limits of travel without the need for a physical stop in the ground.

What comes in the box
QuantityItem
1FAAC C720 24v DC Sliding Operator with Control Board
1FAAC XF 868 SLH Plug in receiver/decoder
2FAAC 868 SLH 2 Channel Transmitter's
1FAAC XP 20W D Pair of Photocells
Motor ModelMains Power SupplyMotor VoltageMax Weight per GateMax Length per GateLocking MethodMotorGate SpeedDuty CycleNotesKITSINGLE KIT
FAAC C720 24 V DC 109320230v24v400kg15000mmMechanically locking motorElectromechanical18 m/minVery-intensiveObstacle Detection.FAAC C720 UK KIT
FAAC C721 24 V DC 109321230v24v800kg15000mmMechanically locking motorElectromechanical18 m/minVery-intensiveObstacle Detection.FAAC C721 UK KIT
C720 UK KIT
2017-01-01

Data sheet

Shipping Index
General
Gate type
Sliding gate
Single or twin kit
Single gate kit
Max weight per gate
400kg
Max length per gate
15000mm
Above or underground
Above ground
Motor
Electromechanical
Locking method
Mechanically locking motor
Power Supply Voltage
230v
Motor voltage
24v
Gate Speed
18 m/min
Duty Cycle
Very-intensive
Obstacle Detection
Built-In Obstacle Detection
Protection Rating
IP 44
Motor Range
C720
Category
Sliding Gate Kit

Specific References

UPC
643570511479
Product Options
Select which Photocells come in the kit
XP 20B D
 
XP 20B D
 
Standard 20m
XP 20W D
 
XP 20W D
 
Battery TX
XP 30B
 
XP 30B
 
XP 30B METAL
 
XP 30B METAL
 
Metal 30m
Additional Security
No Lock
 
No Lock
 
UK-GL124
 
UK-GL124
 
Battery Backup
Battery Backup - for E024S
 
Battery Backup - for E024S
 
Keypad
XKP Radio Keypad
 
XKP Radio Keypad
 
Photocell Accessories
100m Roll of 6 Core Bus Cable 0.5mm
 
100m Roll of 6 Core Bus Cable 0.5mm
 
One Aluminium Photocell Column
 
One Aluminium Photocell Column
 
Two Aluminium Photocell Columns
 
Two Aluminium Photocell Columns
 
Safety Warning Light(s)
FAACLight 24v
 
FAACLight 24v
 
Select Drive Rack
4 x 1m of Galvanised Rack
 
4 x 1m of Galvanised Rack
 
4 x 1m of Nylon Rack
 
4 x 1m of Nylon Rack
 
No Rack
 
No Rack
 
Select which Remotes come in the Kit
XT2-BLK
 
 
XT2-WHT
 
 
XT4-BLK
 
 
XT4-WHT
 
 
Timer
24 Hour 7 Day Timer - 6 Event Times
 
24 Hour 7 Day Timer - 6 Event Times
 
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.