Delivery & Return policy
Complete kit for a pair of swing gates up to 5000mm or 400kg per gate. High Speed operation.
Battery backup is available for this motor for in the event of a mains power failure. Electric gates make it particularly difficult to gain access to a property if the mains power fails.
Equipment designed for the quick & easy installation to existing hinged swing gates. Can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board & low voltage cabling to the motors.
This equipment features adjustable open and close limits. This allows you to set the gates limits of travel without the need for a physical stop in the ground. This feature has some limitiations and may not function correctly on wider gates. For gates where each leaf is over 2.5m we reccomend a physical stop in the open and close positions.
Control Panel has Bus terminals for the connection of photocells and accessories with a easy 2-wire Non-polarised wiring system. Speeds up the installation by preventing errors during installation. Can be connected as desired i.e serial parallel etc.
With this equipment you can adjust the speed of your gate as it approaches the open and closed positions. Further improving on the overall installation and provides a personallised and refined touch to each application.
This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person or a vehicle or an object or even wind obstructing the path of the gate. Although this safety feature can be very effective it is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.
This equipment can be solar powered. Whether you are looking for a low cost eco-friendly installation or want to cut down the cost of installation by removing the need to excavate for mains power or you simply cant get mains power to the gate for whatever reason. This equipment is the ideal choice.
|What comes in the box|
|2||NICE TO5024HS 24v Motor's|
|2||NICE ON2E 2 Button Transmitter's|
|1||NICE MC824H Control Panel|
|1||NICE EPMB Pair of Photocell's|
|1||NICE OXI Receiver|
|Motor Model||Mains Power Supply||Motor Voltage||Max Weight per Gate||Max Length per Gate||Locking Method||Motor||Gate Speed||Duty Cycle||Notes||KIT||SINGLE KIT|
|NICE TO5024HS||230v||24v||400kg||5000mm||Mechanically locking motor||Electromechanical||16 seconds 90 Degrees||Intensive||Hi-Speed||NICE TOONA5024HS-DKIT|
|NICE TO6024HS||230v||24v||1500kg||6000mm||Mechanically locking motor||Electromechanical||26 seconds 90 Degrees||Intensive||Hi-Speed||NICE TOONA6024HS-DKIT|