FAAC R391 24V KIT S

SKU R391 24V KIT S
Spread the cost with finance from 0% interest
Single gate kit. 24v. Max 2500mm. 350kg. Per gate. Easy installation.
  • Swing Gate Kit
  • Single gate kit
  • 24v 80 cycles/day
  • 2500mm or 350kg Max each leaf
  • Above ground Motor
  • 120 Degrees Max opening angle
  • Mechanically locking motor
  • Speed 7 seconds 90 Degrees
  • Built-In Obstacle Detection
£884.40
VAT included

Register & Login!

FAAC R391 24V KIT S

Complete kit for a single residential swing gate up to a maximum of 2.5m each leaf.

Battery Backup Available

Battery backup is available for this motor for in the event of a mains power failure. Electric gates make it particularly difficult to gain access to a property if the mains power fails.

Integrated Open & Close Limits

This equipment features adjustable open and close limits. This allows you to set the gates limits of travel without the need for a physical stop in the ground. This feature has some limitiations and may not function correctly on wider gates. If your gates are over 1.8m in width it is advisable to talk to us before ordering if this feature is critical to your installation.

Designed for large pillars

Especially designed for gates with large square pillars. The articulated arm can easily reach around the corner of the gates pillar without the need to modify any of the bracketry that is normally supplied with other equipment.

Built in obstacle detection

This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person a vehicle an object or even wind obstructing the path of the gate. Although this safety feature can be very effective. It is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.

Quick & Easy Installation

Equipment designed for the quick & easy installation to existing hinged swing gates. Can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board & low voltage cabling to the motors

Bus Connection for Peripherals

Control Panel has Bus terminals for the connection of photocells and accessories with a easy 2-wire Non-polarised wiring system. Speeds up the installation by preventing errors during installation. Can be connected as desired. Serial/Parallel etc.

What comes in the box
QuantityItem
1FAAC 391 E 24v Motor with Control Board & Articulated Arm
1FAAC XF 868 Receiver
2FAAC 868 SLH 2 Channel Transmitter's
1FAAC XP 20B D Pair of Photocells
Motor ModelMains Power SupplyMotor VoltageMax Weight per GateMax Length per GateLocking MethodMotorGate SpeedDuty CycleNotesKITSINGLE KIT
FAAC 391 24v 104577230v24v300kg2500mmMechanically locking motorElectromechanical7 seconds 90 Degrees80 cycles/daySlave motor.FAAC 391 UK KITFAAC 391 UK KIT S
FAAC 391 E 24v 104576230v24v300kg2500mmMechanically locking motorElectromechanical7 seconds 90 Degrees80 cycles/dayMaster Motor with Control Board. Obstacle Detection.FAAC 391 UK KITFAAC 391 UK KIT S
Category 391 Range Brand FAAC

Product Details

Shipping Index 1
Motor Range 391
Category Swing Gate Kit
R391 24V KIT S

Product Reviews / Q&A

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
  • Questions & Answers (0)