SBQEDGLWL
  • SBQEDGLWL

GATEMASTER QUICK EXIT SURFACE FIXED GATE LOCK

SBQEDGLWL
£168.67 (Includes VAT at 20%)
  • Gatemaster
  • Digital lock one side
  • Quick exit one side
  • Surface fixed for wooden gates
  • Screw on
Lock Hand
Quantity
Choose Options

100% secure payments
 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
0 / 5
Average : 0 / 5
Based on 0 customer reviews.

GATEMASTER QUICK EXIT SURFACE FIXED GATE LOCK

A Quick Exit digital gate lock designed for easy surface fitting to wooden or metal gates. The lock has a convenient mechanical keypad and a free exit push pad on the inside. Easily install the lock by simply drilling 3 holes through the gate frame for the fixing screws and connecting spindle. The latchbolt will automatically latch into the gate frame as the door closes. To open the gate simply enter the code and turn the handle or use the exit push pad from the inside. This lock does not need any power to operate. Its high quality digital keypads ensure a long lasting durability.

Auto-latching • close the gate and the latchbolt latches into the gate frame

Easy to fit • simply drill 3 holes through the gate frame and bolt on using the fixings supplied

No power needed • Fully mechanical for a quick and easy install

Secure • Latchbolt projects up to 20mm into the keep which increases security and gives more tolerance

Long lasting • Brass bearing plate supports the latchbolt reducing wear and increasing product life

Adaptable • The latchbolt can be adjusted in length for different size gaps between the gate and post

Durable • The marine grade keypads are tested to over 1000 hours salt spray to ensure they survive the elements

Security shroud available to ensure push pad can’t be operated from outside the gate

Keep box supplied for extra security

Left and right hand versions

What comes in the box
QuantityItem
1 GATEMASTER QUICK EXIT SURFACE FIXED GATE LOCK Gate Lock
SBQEDGLWL
2001-01-01

Data sheet

Shipping Index
Gatemaster
To suit frame width
10mm, 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm
Category
Gate Lock

Specific References

upc
643570436284
Product Options
Lock Hand
Left Hand
 
Left Hand
 
Right Hand
 
Right Hand
 
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.