GATEMASTER SUPERLOCK SURFACE DIGITAL DOUBLE SIDED
  • GATEMASTER SUPERLOCK SURFACE DIGITAL DOUBLE SIDED
  • GATEMASTER SUPERLOCK SURFACE DIGITAL DOUBLE SIDED
  • GATEMASTER SUPERLOCK SURFACE DIGITAL DOUBLE SIDED
  • GATEMASTER SUPERLOCK SURFACE DIGITAL DOUBLE SIDED
  • GATEMASTER SUPERLOCK SURFACE DIGITAL DOUBLE SIDED

GATEMASTER SUPERLOCK SURFACE DIGITAL DOUBLE SIDED

BDGWL
£282.35 (Includes VAT at 20%)
  • Superlock
  • Digital lock both sides
  • Bolt on
  • Stainless Steel Powder Coated
  • Surface Fixed for Wooden Gates
  • Easy Installation
Lock Hand
Quantity
Choose Options

100% secure payments
Average votes for this product
5.0 / 5
Average : 5.0 / 5
Based on 1 customer reviews.

SUPERLOCK SURFACE FIXED DIGITAL DOUBLE SIDED

This is the brand new Surface Fixed Gatemaster Superlock Digital double sided. It features a keypad on both sides. Simple to install. Drill three holes through the gate frame and bolt the lock together for a extra easy high security solution. Adjust the bolt to suit the gap. Easy to operate with the smoothest locking action. It doesn’t require any power either as this lock is purely mechanical. The slim 70cm case and adjustable bolts ensure an easy fitting to a wide range of gate styles and sizes. This lock has two versions and works on left or right handed gates.

Easy-to-fit. Adjustable and adaptable

70mm slim case

20mm latching action

No power needed

Left hand and right hand versions available

Stainless-steel mechanics and a stainless-steel lock box for even better corrosion resistance. And it's tested to 500,000 openings maintenance-free!

SINGLE SIDED LOCK AVAILABLE BDGSW - CLICK HERE TO VIEW

What comes in the box
QuantityItem
1 Superlock Surface Fixed Gate Lock
BDGWL

Data sheet

Shipping Index
Gatemaster
To suit frame width
10mm, 20mm, 25mm, 30mm, 40mm, 50mm, 60mm
Fitting
Bolt on
Category
Gate Lock
Product Options
Lock Hand
Left Hand
 
Left Hand
 
Right Hand
 
Right Hand
 
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.