• -5.68%
DGL
  • DGL

GATEMASTER DIGITAL GATELOCK DOUBLE SIDED

DGL01
£177.13 (Includes VAT at 20%) Save 5.68%
RRP £187.80 (Includes VAT at 20%
  • Gatemaster
  • Digital lock both sides
  • Bolt on
Frame Size
Quantity
Choose Options

100% secure payments
 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
5.0 / 5
Average : 5.0 / 5
Based on 5 customer reviews.

GATEMASTER DIGITAL GATELOCK DOUBLE SIDED

The Gatemaster Digital Gatelocks have been developed to meet the increased demand for keyless entry through gates. This marine grade Digital Gatelock double sided has many unique features. The latchbolt will automatically latch into the gate frame as the door closes. To then open the gate enter the code and turn the handle. This lock does not need any power to operate. Its high quality digital keypads ensure a long lasting durability. This lock is perfect for both single and double gates and its square design makes it easy to incorporate into the various designs of gates. Finally the lock can only be taken off the gate when the gate is open which requires the code.

Closing the door latches the latchbolt into the gate frame

Marine grade keypads ensure long lasting durability

Salt spray tested for 1000 hours

No power needed

Latchbolt moves 22mm

Brushed finish stainless steel bolt support plate with brass bearing

Strike plate included

What comes in the box
QuantityItem
1 GATEMASTER DIGITAL GATELOCK DOUBLE SIDED Gate Lock
DGL01

Data sheet

Shipping Index
Gatemaster, Gatemaster
To suit frame width
10mm, 20mm, 25mm, 30mm, 40mm, 50mm, 60mm
Fitting
Bolt on
Category
Gate Lock

Specific References

UPC
643570482281

Download

Product Options
Frame Size
 
10mm - 30mm
 
 
40mm - 60mm
 
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.