• -20%
CLICKLINE SAFETY EDGE
  • CLICKLINE SAFETY EDGE

BIRCHER CLICKLINE SAFETY EDGE

BR-CL2830/1/1.5m 4m Cable
£95.85 (Includes VAT at 20%) Save 20%
RRP £119.81 (Includes VAT at 20%
Bircher ClickLine Resistive Safety Edge
Select a Safety Edge Profile
Select Edge Length
Edge Type
Cable Length
Quantity
Choose Options

 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
0 / 5
Average : 0 / 5
Based on 0 customer reviews.

BIRCHER CLICKLINE SAFETY EDGE

Bircher ClickLine Resistive Safety Edges allow the installer the easiest possible installation thanks to the click in feet. No need to endure the tedius pulling and tugging of of the rubber profiles down the aluminium channel. Also this method of installation means that down the line if an edge becomes damaged it can be easily replaced.

What comes in the box
QuantityItem
1ClickLine Edge Made to measure
BR-CL2830/1/1.5m 4m Cable
2001-01-01

Data sheet

Category
Safety Edge

Specific References

upc
643570451508
Product Options
Cable Length
Edge Type
Select a Safety Edge Profile
28mm x 30mm
 
28mm x 30mm
 
30mm x 42mm
 
30mm x 42mm
 
36mm x 65mm
 
36mm x 65mm
 
Select Edge Length
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.