INTRA6 BR-INTRA6/2 KIT
  • INTRA6 BR-INTRA6/2 KIT

BIRCHER INTRA6 BR-INTRA6/2 KIT

INTRA6 BR-INTRA6/2 KIT
£479.23 (Includes VAT at 20%)
Bircher Intra6 Kit Cat2
Quantity

 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
0 / 5
Average : 0 / 5
Based on 0 customer reviews.

BIRCHER INTRA6 BR-INTRA6/2 KIT

Complete Kit for the installation of one resistive safety edge at each end of a sliding gate. Please purchase your resistive safety edges seperately. This is a Cat 2 Safety Device.

What comes in the box
QuantityItem
1BR-INT/2 System Controller
1BR-INT/FIX60 Fixed Coil
1BR-INT/MOB61 Primary Edge Controller
1BR-INT/MOB62 Secondary Edge Controller
1BR-INT/ASK60 Installation Set
112m BR-INT/SC12 Steel Cable
INTRA6 BR-INTRA6/2 KIT

Data sheet

Category
Inductive Safety
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.