• -33%
CAME GARD4-DX
  • CAME GARD4-DX

CAME GARD4 3.75m Deluxe barrier kit

CAME GARD4-DX
£1,396.07 (Includes VAT at 20%) Save 33%
RRP £2,083.68 (Includes VAT at 20%
  • Automatic Barrier Kit
  • GARD4-DX
  • Motor Voltage: 24v
  • Boom Length: 4m
  • Electromechanical Motor
  • 2 to 6 seconds Opening Time
  • intensive Duty Cycle
Quantity

 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
0 / 5
Average : 0 / 5
Based on 0 customer reviews.

CAME GARD4 3.75m Deluxe barrier kit

A complete Automatic Barrier Kit from CAME. The CAME GARD4 3.75m Deluxe barrier kit is supplied with a 4m Boom. The average opening time of the Barrier is 2 to 6 seconds. This Barrier features an Electromechanical motor with a intensive duty cycle.

What comes in the box
QuantityItem
1G3750 Barrier Unit
1G03750 4m Aluminium Boom
1G03756 4m Boom Reinforcing
1G06080 Balancing Spring
1LED Luminous Cord 9m
1G028402 LED Cable
1G02807 Fixed Rest
1G02809 Reflective Strips1DELTA-I Pair of Photocells
Barrier KitsPower Supply VoltageMotor VoltageMax Boom LengthBoom LengthMotorOpening timeDuty CycleNotes
GARDPT2.5230v36v2.5m3.8mElectromechanical1.2 to 4 secondscontinuous Brushless > 2 million cycles
GARD4-ST230v24v4.2m4mElectromechanical2 to 6 secondsintensive
GARD4-DX230v24v4m3.75mElectromechanical2 to 6 secondsintensive
GARD3-ST230v24v3.5m3mElectromechanical2 to 6 secondsintensive
GARD3-DX230v24v3.5m3mElectromechanical2 to 6 secondsintensive
G3230v24v3m2.75mElectromechanical0.9 secondsintensiveFast Version
GARDPT3230v36v3m3.8mElectromechanical1.2 to 4 secondscontinuous Brushless > 2 million cycles
G4-ST230v24v4m3.8mElectromechanical2 to 6 secondsintensive
G4-DX230v24v4m3.75mElectromechanical2 to 6 secondsintensive
G4-EZT230v24v4m3.75mElectromechanical2 to 6 secondsintensiveHigh Duty Cycle
CAME GARD4-DX

Data sheet

Shipping Index
General
Max Boom Length
3.75m
Opening Time
2 to 6 seconds
Boom Length
4M
Motor
Electromechanical
Power Supply Voltage
230v
Motor voltage
24v
Duty Cycle
Intensive
Category
Automatic Barrier Kit
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.