FAAC B680 S 3M KIT
  • FAAC B680 S 3M KIT

FAAC B680 standard small 3m beam kit

FAAC B680 S 3M KIT
£2,725.20 (Includes VAT at 20%)
  • Automatic Barrier Kit
  • B680 S 3M KIT
  • Motor Voltage: 24v
  • Boom Length: 3m
  • Hybrid Motor
  • 1.5 to 6 seconds Opening Time
  • continuous Duty Cycle
  • Built-In Obstacle Detection
Quantity

 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
0 / 5
Average : 0 / 5
Based on 0 customer reviews.

FAAC B680 standard small 3m beam kit

A complete Automatic Barrier Kit from FAAC. The FAAC B680 standard small 3m beam kit is supplied with a 3m Boom. The average opening time of the Barrier is 1.5 to 6 seconds. This Barrier features an Hybrid motor with a continuous duty cycle.

What comes in the box
QuantityItem
1FAAC B680 Hybrid B680H body
1E680 control unit
1B680 housing (choice of colours)
1foundation plate
1small bracket and spring
1small one piece beam and refelctive strips
Barrier KitsPower Supply VoltageMotor VoltageMax Boom LengthBoom LengthMotorOpening timeDuty CycleNotes
B680 S 2M KIT230v24v2m8.3mHybrid1.5 to 6 secondscontinuous
B680 S 3M KIT230v24v3m8.3mHybrid1.5 to 6 secondscontinuous
B680 S 4M KIT 230v24v4m8.3mHybrid1.5 to 6 secondscontinuous
B680 S 5M KIT 230v24v5m8.3mHybrid1.5 to 6 secondscontinuous
B680 L 5M KIT 230v24v5m8.3mHybrid1.5 to 6 secondscontinuous
B680 L 6M KIT 230v24v6m8.3mHybrid1.5 to 6 secondscontinuous
B680 L 7M KIT230v24v7m8.3mHybrid1.5 to 6 secondscontinuous
B680 L 8M KIT 230v24v8m8.3mHybrid1.5 to 6 secondscontinuous
FAAC B680 S 3M KIT

Data sheet

Shipping Index
General
Max Boom Length
8.3M
Boom Length
3M
Motor
Hybrid
Power Supply Voltage
230v
Motor voltage
24v
Duty Cycle
continuous
Obstacle Detection
Built-In Obstacle Detection
Category
Automatic Barrier Kit
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.