Nice gate automation, motors & spares
Looking for Nice gate equipment? Start with what you need: a new automation kit, a replacement motor or a part for the system you already have. Browse the routes below, or send us the full model and control-board references if you need help identifying a replacement.
Find the Nice equipment you need
- For a new installation, compare Nice gate automation kits by gate type, size and what is included.
- For a replacement drive unit, browse gate motors and operators with the full code from the original motor.
- For an identified component, explore gate automation spares.
- For another handset, start with gate remote controls and the transmitter reference.
Nice TO4024 or TO5024?
Both are 24 V TOONA swing-gate operators. Nice describes TO4024 for leaves up to 3 m and TO5024 for leaves up to 5 m. Gate weight, hinge position, opening angle and the complete installation still matter. If you are replacing a motor, keep the full code: TO5024I, TO5024HS and TO7024 are separate versions.
See the individual TO4024 motor and TO5024 motor. Building a new system? Compare the TOONA4024 twin-gate kit, TOONA5024 single-gate kit and TOONA5024 twin-gate kit. Check each listing for the number of motors, control equipment and other supplied parts.
What is Nice BlueBUS?
BlueBUS lets a compatible Nice control unit power and communicate with supported accessories, such as photocells, over two wires. The control unit identifies the connected devices during setup. Nice's BlueBUS instructions explain the connection and learning process. When replacing a photocell or control board, send us both references so we can help you find the right equipment for that system.
Already know your Nice model?
TOONA and WINGO are different swing-gate families: WG4024 and TO4024 are different motors despite the shared number. Browse the TOONA range or WINGO range. For a sliding gate, see ROBUS; for an underground swing-gate installation, see L-FAB.
Nice TUB motors and controls
If the label says TUB3500, TUB4000, D-PRO500 or MINDY A500, keep the whole reference when asking for a replacement. The motor and control equipment are different parts. Send us photographs of both labels and tell us which part you need; we can help identify the relevant Nice equipment.
Replacing a remote, photocell or control board?
Use the code on that component as well as the motor model. Browse gate remotes, photocells or control boards. If the old part is hard to identify, email sales@metalines.com with clear photographs of its label and the installed controller. We can help you narrow down the part before you order.
Find your model
Use the full model and part number, including any suffix, when comparing a new kit, motor or spare with equipment already installed. If the label is unclear, send us a photograph and we can help identify it.
- Tub — Nice kits, replacement motors, parts and spares
- Run — Nice kits, replacement motors, parts and spares
- Toona — Nice kits, replacement motors, parts and spares
- Wingo — Nice kits, replacement motors, parts and spares
- Hyke — Nice kits, replacement motors, parts and spares
- X-Fab — Nice kits, replacement motors, parts and spares
- Titan — Nice kits, replacement motors, parts and spares
Looking for Nice M-Fab?
M-Fab is an underground swing-gate range. If you are planning a new gate, compare underground gate kits. For an existing gate, the complete kit, motor, control board and replacement parts are different purchases: browse motors, control boards or spares. Keep the full model and part references so we can help you find the right item.












