Gate guide rollers and guide channels

Nylon guide rollers help keep a sliding gate upright as it moves. They can run beside the gate or inside a channel fixed behind it. This range includes individual rollers and galvanised guide channel in 3 m and 6 m lengths.

Replacing a roller? Measure the bolt's metric thread size (its M size), the nylon roller's outside diameter and its length. These are the useful starting measurements even when there is no part number on the old roller. If you need the bracket too, see complete sliding gate top guides.

Filter products

Product Type

Diameter

There are 16 products.
Showing 1-12 of 16 item(s)

How do I measure a replacement guide roller?

  1. Check the bolt's M size. Measure the diameter of the threaded part of the bolt and compare it with the size shown on the product listing, such as M12 or M16.
  2. Measure the nylon. Note the roller's outside diameter and its length along the bolt. Measure the plastic part, not the whole bolt-and-roller assembly.
  3. Check where it runs. Make sure the new roller will fit the bracket or channel you already have. If you are replacing the bolt as well, compare its length and how it fixes to the bracket.

You do not need to identify the make of a bespoke gate to start this check. If the old roller has no visible reference, the measurements and a clear photograph are more useful to us.

Choosing rollers for a new sliding gate?

Decide how the top of the gate will be guided before choosing individual rollers. A flat-topped gate can use an over-the-top guide; a curved gate or one with finials can use rollers running in a channel behind it. See top guides and brackets for those two arrangements. If you are making your own channel, leave a suitable clear opening for the rollers and check that the gate remains guided throughout its travel.

Which guide channel do you sell?

We stock galvanised DRIVER guide channel in 3 m and 6 m lengths. It can be fixed behind the gate for the guide rollers to run in. A suitable channel can also be fabricated from angle iron or other steel, provided there is enough clear space for the chosen rollers to run without binding. Check the channel position and roller fit before fixing it to the gate.

Is a guide roller the wheel the gate runs on?

No. These nylon rollers guide the gate near the top; they do not carry its weight on the ground. If you need the wheels under a tracked sliding gate, see sliding gate running wheels.

Do you sell spring-loaded guide rollers?

Not at present. The guide rollers in this range are fixed, not spring loaded. If you are unsure what is fitted to your gate, send us a photograph and we can help identify the type of part you need.

Need help matching a roller or channel?

Email Metalines a photograph and the bolt M size, roller diameter and nylon length, or the channel opening if you are building a new guide. We can help you choose from the information you provide.