Parts & Replacements
Nylon Guide Roller 30mm Diameter
This form allows our team to specifiy the equiptment for your upcoming installation. We will make sure the equiptment selected is suitable so that you dont have to. This will also open a dialogue between you and our team in which you can ask further questions and advice.
It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.
Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.
This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements
Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.
This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.
No reviews at this time.
Nylon Guide Roller 40mm Diameter
O Groove Wheel On Internal Support 80mm Diameter
O Groove Wheel On Internal Support 100mm Diameter