FAAC 770 and 770N gate motors, kits and parts

Looking for a FAAC 770 underground gate kit, a replacement 770N motor or a part for your existing gate? You will find all three here. Start with the motor label if you are repairing a system: 24V and 230V versions need different equipment, and an older 770 is not automatically the same as a 770N.

For a new gate, compare the 770 kits below or browse underground gate automation kits across the wider range. If you know the part number already, use the matching motor or component listing rather than buying a complete kit.

Filter products

Product Type

There are 21 products.
Showing 1-12 of 21 item(s)

Which FAAC 770N motor do I need?

FAAC lists 10675301 as the 770N 24V motor and 10675201 as the 770N 230V motor. Look at the label on your existing operator and the control-board reference before choosing. A 230V mains connection to the control panel does not, by itself, tell you which voltage the motor uses.

If the label says 770 rather than 770N, send us its reference and photographs of the motor, foundation box and release. We can help you find the right route without assuming a newer motor will fit every older installation. For the manufacturer's figures, see FAAC's 24V and 230V specifications.

Do I need a full kit or just one part?

A new automation system needs more than the underground motor. Start with the single-gate 230V kit or twin-gate 230V kit; for 24V, see the single-gate kit or twin-gate kit. Contents and control-panel options differ, so use the individual listing to see the supplied boxes, controls, remotes and safety devices. An upgrade-labelled kit may supply a different set of parts from a new-installation kit.

For an identified repair, you can buy a foundation box, motor spare or release component separately. The product grid on this page also includes accessories such as a keyring and booklet; they are not 770 motors or kits.

What is an encoder on a FAAC 770N?

An encoder helps the control system monitor gate movement. FAAC specifies a virtual encoder on the 770N 24V system, while an absolute encoder is an optional addition for certain 230V arrangements. It is a different part of the system from a physical opening or closing stop. If you need a replacement encoder or control board, tell us the motor and board references so we can identify the right parts.

How much room does the gate need?

FAAC rates the standard 770N arrangement for a gate leaf up to 3.5 m and 500 kg, subject to the rest of its specification and the gate design. Optional 140° and 180° opening kits change the permitted leaf length; the ordinary 3.5 m figure should not be carried over to those arrangements. FAAC also says its optional opening and closing stops are not used with the 180° opening kit.

Ask us about the opening angle, foundation-box position and manual release before ordering a new system. If you are comparing other designs too, see swing gate automation kits. For a new installation, our gate survey form helps us narrow down the equipment. For a known part, email us the reference or browse FAAC gate automation and spares.