Gate finger guards & profiles

Looking for protection around a gate hinge or another finger-trap gap? Browse our ready-sized finger guards, a roller guard, rubber profile and fixing rail. These are different purchases: the right one depends on the gate's movement, the gap and where the guard can be fixed.

If you already have a part number, start there. For a new installation, measure the gap through the full movement and ask the installer to confirm the guarding needed before choosing a length or profile.

There are 6 products.
Showing 1-6 of 6 item(s)

Which type of finger guard do you need?

The CP-0016, CP-0017 and CP-0018 guards are ready-sized hinge-gap products in different heights and widths. The FP800 is a roller-style finger guard. The PG-SM25 is a 10 m rubber-profile reel, while PA-SM is an aluminium fixing angle. Choose the complete guard or the specified component you need, rather than treating the rail or profile reel as a complete ready-sized guard.

What should you measure?

Measure the gap and the height to protect, and check how the gate and post move relative to one another from closed to fully open. Note the available fixing surface and whether the position is exposed to weather. The printed profile width is not necessarily the gap it can cover; compare the exact product drawing and fitting instructions with your installation.

Can a finger guard be cut to length?

It depends on the model. The maker describes the CP-0018 guard as cuttable. The FP800 roller guard is offered in set or special-order lengths and cannot be cut down. Check the instructions for the exact product before altering it.

Is a finger guard the same as a safety edge?

No. A finger guard covers a gap; a contact safety edge responds to contact when connected to an appropriate control system. If you are choosing protection for an automated gate, the whole installation needs assessment. The HSE's powered-gate guidance explains why a component alone does not settle that question.

Need help identifying a specified guard or fixing? Email sales@metalines.com with its reference, photographs and measurements. For the pivot hardware itself, browse gate hinges. Metalines supplies the parts but does not carry out site installation.