Weld-in gate locks

Building a metal gate? A weld-in lock sits in a case fitted into the gate frame. The case is typically mild steel and can be painted with the gate after fabrication, giving it a neat, flush finish. Choose what should happen when the gate closes: should it catch shut, need a key to open, or latch for everyday use and deadlock when you turn the key?

Weld-in locks are easiest to plan before the gate is made, so the fabricator can prepare the frame, receiving post and finish around the chosen lock. If you are adding a lock to an existing gate without welding, start with our bolt-on gate locks.

Filter products

Product Type

To suit frame width

There are 8 products.
Showing 1-8 of 8 item(s)

Which weld-in lock suits your gate?

Choose how the gate should latch and lock
What you wantStart withHow it works
The gate catches shut and needs a key to open it againSelect Pro long-throw keylatch (SWKL)The latch engages as the gate closes; the key operates it for entry. This is a different choice from a handle-operated latch.
A handle for everyday use, with key locking when neededSelect Pro latch-deadlock (SWLD) or double-throw latch-deadlock (GLD)The handle operates the latch. Turning the key adds the deadlocking action. Compare the two model drawings and chosen handle arrangement for your frame.
Key-operated locking without an everyday handle latchSelect Pro deadlock (SWD) or double-throw deadlock (GD)These are deadlock choices, not self-latching gate catches. Choose the model and frame-size version for the way the gate will be used.
A sliding gate with a hook lock and code operationGatemaster hook-lock and digital-lock kitA sliding gate needs its hook and receiver positioned for sideways travel. See our sliding-gate locks for the wider choice.

Want to open the gate with a handle? Choose the handles when you choose the latch-deadlock, before the frame is cut. Add a suitable handle set for GLD; SWLD also offers a choice of handles. We can help you match the parts to your gate.

What happens when the lock is welded into the gate?

The steel case is fitted into a prepared opening in the gate frame. With Gatemaster's Select Pro SWLD, the internal mechanism can be removed while its case is welded and the gate is finished, then fitted back afterwards. Give your fabricator the drawing for the exact lock and frame-size version before any steel is cut.

Also allow for the receiving post: the latch or deadbolt must meet its strike plate or keep when the gate closes. For a replacement, photographs of the case, faceplate and receiving side help us identify what can be changed without remaking the gate.

Do you need a whole lock or just a fitting?

The GLDP weldable strike plate receives a matching double-throw latch-deadlock at the post; it is not the lock itself. Weldable escutcheons are protective fittings around a cylinder, not a locking mechanism. If you need only a case or an internal replacement mechanism, send us the lock reference and photos so we can identify the right part.

Already have a welded-in lock?

Before replacing the whole assembly, check the reference on the faceplate and photograph both the lock and the receiving post. Tell us whether the gate should latch automatically, use a handle or only lock when you turn the key. We can help match the mechanism or suggest the closest current alternative. If the gate has no prepared welded case, a bolt-on lock may be a simpler route.