Which photocell fits this column?
Use the full sensor reference when choosing a column. A column from the same brand can still be made for a different sensor or fixing method. For example, CAME lists DIR-L as a post for DIR10, DIR20 and DIR30 photocells, while DIR-P is an extension for a double-pair arrangement. Compare CAME's DIR post options and keep the full code when asking us to help identify a replacement.
The range includes full posts, adapters, finishing parts and base plates. Choose only the parts called for in the drawing for your sensor and mounting arrangement. Some posts in the wider grid are made for a keypad or key switch rather than a photocell, so check their stated purpose before ordering.
Need a FAAC photocell column or base?
FAAC references such as 401035, 401034, 401028 and 401070 identify different columns, while 737637, 737100 and 737630 identify foundation-plate choices. Send us the photocell reference, the column or base you are replacing, and a photograph of the mounting if you need help narrowing it down. Choose the exact height and compatible mounting parts from the product drawing rather than the FAAC name alone.
One post, a pair or a dual-height arrangement?
“Pair” tells you how many posts are supplied; “dual height” means sensors can be positioned at different levels. Neither tells you whether the photocells, adapters or foundations come in the box. Compare the contents of the exact product listing, especially if you are buying posts and sensors together.
What else belongs on the order?
You may need the photocell pair, a matching adapter, a base plate or fixings in addition to the column. Check the drawing and listing for the particular combination rather than adding every item by default. If the installation uses sensors at more than one height, ask the installer which positions and compatible parts are required for the gate.
Replacing an older post or damaged base
Send us the old post and sensor references, clear photographs of the mounting and any dimensions shown in the product drawing. We can help identify a matching replacement or the parts needed for a changed setup. Your installer should confirm the final position, alignment and safety arrangement on site.