• -1%

ENC S700/800 ENCODER PARTS ONLY

NS800ENCUK KIT
£196.02 (Includes VAT at 20%) Save 1%
RRP £198.00 (Includes VAT at 20%

New encoder for the Faac S700

Quantity

 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
0 / 5
Average : 0 / 5
Based on 0 customer reviews.

The old style Faac S700 Encoder is no longer available.

If you need to replace the encoder, this is the product you need.

The price includes the following parts excluding labour for the parts:

Description

Part Number

1 x Bush Upper

63000557

1 x Bush Lower

63000554

1 x Baseplate

63000553

1 x ‘O’ Ring

63000560

1 x ENC Encoder

63000559

1 x Shaft

63000558

1 x Top Seal

7093225

NS800ENCUK KIT

Data sheet

Motor Range
S700H, S800H
Category
Parts

You might also like

New encoder for the Faac S700

Get the encoder upgraded by the manufactuerer.

You will have to return the motor to us. We will contact you about this.

Upgrade will be carried out by the manufacturer.

Includes parts and labour and return postage.

ENC S700 ENCODER UPGRADE...

Regular price £240.00 -1% Price £237.60
  • -1%
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.