BFT Stoppy B Automatic Rising Bollard Kit with Control Panel & 2 Remotes

BFT Stoppy B 115/500

Stoppy B 200/700

Commercial Size: 500mm Class

Technical size reference: 114mm diameter / 490mm height

Lighting: Reflective strip, no light crown

Best suited to: Domestic driveways, parking bays, lower-profile access control

Visual presence: More discreet

Finish options: Painted RAL 7015 or stainless steel

Commercial Size: 700mm Class

Technical size reference: 194mm diameter / 700mm height

Lighting: LED light crown and reflective strip

Best suited to: Wider entrances, commercial sites, higher-visibility access control

Visual presence: More prominent

Finish options: Painted RAL 7015 or stainless steel

Installation and site preparation

Automatic rising bollards require proper groundworks, drainage, cabling and safety setup. They are not a simple surface-mounted product.

Before ordering, the installer should consider:

• Bollard position and clear vehicle path
• Foundation size and depth
• Drainage route
• Cable ducts to the control panel
• Mains supply and local isolation
• Safety device positions
• Manual release access
• Ground conditions
• Whether a single or twin bollard layout is required
• Whether loop detectors, photocells or traffic lights are needed

As a guide, Stoppy B installations require a prepared foundation and suitable drainage. The 500mm and 700mm models have different installation depths, so the correct product dimensions must be checked before groundworks begin.

This product should be installed by a competent installer familiar with automatic bollards, mains-powered automation and current safety requirements.

Frequently asked questions

Does the 500mm Stoppy B have LEDs?

The standard Stoppy B 115/500 is treated as the reflective-strip model rather than the LED light-crown model. The LED light crown is associated with the Stoppy B 200/700.

What is included in the kit?

Each kit includes the Stoppy B bollard or bollards, a PERSEO control panel and two BFT remotes. Single kits include one bollard. Twin kits include two bollards.

Can one control panel run two bollards?

Yes. A twin Stoppy B kit is designed so the bollards can be controlled together from the supplied PERSEO control panel.

Can the system be used with loop detectors?

Yes, loop detectors can be used as part of a properly designed Stoppy B installation. They are commonly used for vehicle detection, automatic exit or safety logic.

Can the bollard be connected to an intercom or access-control system?

Usually yes, provided the access-control system can give the correct relay or clean-contact command to the control panel. Compatibility should be checked before installation.

Is stainless steel better than painted steel?

Stainless steel is mainly the premium appearance option. Painted RAL 7015 is the standard practical finish and is suitable for many domestic and commercial installations.

Is the Stoppy B suitable for commercial use?

Yes, the Stoppy B can be used for commercial access-control applications, especially car parks, business entrances and managed vehicle access points. For high-security, crash-rated or hostile-vehicle mitigation requirements, ask us first.