Gatemaster Superlock Combination Gate Lock Single Sided (BDGS)

Gatemaster Superlock Combination Gate Lock Single Sided (BDGS)

This is the brand new Gatemaster Superlock Digital single sided. It features a keypad one one side and a handle on the other. Simple to install. Bolts onto box section on the gate frame. Adjust the bolt to suit the gap. Easy to operate with the smoothest locking action. It doesnt require any power either as this lock is purely mechanical. The slim 70cm case and adjustable bolts ensure an easy fitting to a wide range of gate styles and sizes. This lock has two versions and works on left or right handed gates.

Superlock 2.0 Has Arrived

Setting a new standard for gate locks: We’re proud to introduce Superlock 2.0—the next evolution of Gatemaster’s flagship lock range. Built on decades of engineering expertise and shaped by installer feedback, Superlock 2.0 raises the bar for strength, durability, and usability.

What’s New in Superlock 2.0?

One-Piece Strength: Redesigned casing improves structural integrity and impact resistance.

Enhanced Outdoor Durability: Superior materials and finishes withstand harsh weather and coastal conditions.

Modern Design: Streamlined, professional look to complement both metal and wooden gates.

Easier Code Changes: Update access codes without removing the lock from the gate—saving time on site *with the Rapid Reset Locks.

Frame Size (10-30mm or 40-60mm)

• Frame Size 10-30mm: Designed to fit frames with a thickness between 10mm and 30mm, these locks are ideal for lighter or narrower gate frames.
• Frame Size 40-60mm: Suitable for frames with a thickness between 40mm and 60mm, these locks provide a secure fit for larger or sturdier gate frames.

Left- or Right-Handed? How to Choose the Correct Lock for Your Gate

Not sure if your gate is left- or right-handed? Don’t worry! It’s an easy process, and we’ll guide you through it step by step.

What Does "Handing" Mean?
Handing simply refers to the side of the gate where your hinges are located. It determines the type of lock you’ll need for proper installation. This is important to get right before purchasing your lock and gate hardware.

How to Determine the Handing of Your Gate
Follow these foolproof steps to identify your gate's handing:

1. Stand Outside the Gate: Position yourself on the outside of the gate (the side where you would approach the lock). If the gate hasn’t been installed yet, visualize yourself standing outside.

2. Check the Hinges: Look at the gate and find the hinges. Are they on the left or right side of the gate frame?

   • Important: The direction your gate opens (inwards or outwards) does not matter here—only the position of the hinges!

3. Match the Handing to the Hinge Position:

   • If the hinges are on the right, you have a right-handed gate and will need a right-handed lock.
   • If the hinges are on the left, you have a left-handed gate and will need a left-handed lock.

It’s as simple as that! Just remember: hinge position = lock handin