4G+ENC
  • 4G+ENC

GSM Dialler 4G GATE AND DOOR OPENER

4G+ENC
£148.00 (Includes VAT at 20%)
GSM Dialler 4G GATE AND DOOR OPENER
  • 1p per dial in
  • Capped at £20 max
  • Works on any UK network
  • 2G 3G & 4G
Quantity

 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
0 / 5
Average : 0 / 5
Based on 0 customer reviews.

GSM Dialler 4G GATE AND DOOR OPENER

GSM Gate and Door Opener in an IP rated Enclosure allows the operation of gate and garage door automations via a quick phone call from any registered telephone number. This clever pcb allows to the user to quickly and easily operate automations without a keyfob or a key code. Very quick and easy installation eliminated the need for expensive remote controls. System has space for 1000 registered telephone numbers which can be added and removed by the administrator via a simple text message or via the software accessed on a web browser. Programming via a simple text message with a pin number and simple commands like ADD and REMOVE. The user can also get a list of registered number by sending a text with the pin number and the corresponding command. For a full list of commands and features please see the manual. Please check the signal quality in your area on your network providers website before purchasing. This version works on 4G networks. You do not need to buy a sim card. The product incorporates an esim that works on EE O2 and Vodafone. For more details talk to our team. You can do dial-to-open and this costs 1p per dial-in up to £20 maximum per year at which point it's free. So your average user leaving the house and returning 7 days a week will only be charged £7.28 a year which is cheaper than any PAYG SIM. A car park will probably have 2000 calls in a few months but then it's capped at £20. This would be the same with WiFi but you have the trouble of setting up WiFi. It's good where the cellular is poor.

What comes in the box
QuantityItem
14G PCB
1IP Rated Enclosure
4G+ENC

Data sheet

Shipping Index
General
Category
Gsm Opener
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.