• -35%
  • New
SELT2BDG 806SL-0290
  • SELT2BDG 806SL-0290

CAME SELT2BDG RECESS MOUNTED BUS CXN KEYPAD - 806SL-0290

SELT2BDG - 806SL-0290
£62.01 (Includes VAT at 20%) Save 35%
RRP £95.40 (Includes VAT at 20%
  • Digital Keypad
  • Wired
  • Recess Mounted
  • Use on any system with S0002M
  • CXN Bus Model
  • Blue Backlight
Quantity

100% secure payments

CAME SELT2BDG RECESS MOUNTED BUS CXN KEYPAD - 806SL-0290

Wired Digital Keypad. 12 Key-Selector for Added Security. Blue Backlight. Hard Wired using Two Wire Technology. Surface mounted. RAL7024 Grey. Requires CAME CXN Bus control panels or for any other control panel requires the S0002M. Green and red feedback light on CXN BUS versions

With the CXN line of accessories with BUS technology,

installation can be completed more easily and quickly.

Each individual accessory can be configured after completing

installation and setting the address of each device.

It is also possible to obtain a complete diagnosis on each device.

EVERYTHING WITH TWO WIRES!

CXN is a non-polarized 2-wire BUS system for the installation of all compatible CAME

accessories:

• KEYPAD SELECTORS

(806SL-0280 and 806SL-0290)

• TRANSPONDER SENSORS

(806SL-0300 and 806SL-0310)

• DLX SERIES PHOTOCELLS

(806TF-0090 and 806TF-0100)

• DXR SERIES PHOTOCELLS

(806TF-0110)

• KRX SERIES FLASHING LIGHT

(806LA-0050)

3 Year Warranty

To support our confidence in CAME we offer a 3 year warranty on all CAME electrical components.

What comes in the box
QuantityItem
1 CAME SELT2BDG Wired Digital Keypad - 806SL-0290
SELT2BDG - 806SL-0290

Data sheet

Shipping Index
General, General
Wired or wireless
Wired
Protection Rating
IP 54
Fitting
Surface
Category
Digital Keypads

You might also like

Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.