NICE WINGO5024BDKCE-DKIT ELECTRIC GATE KIT

Reference WINGO5024BDKCE-DKIT

Quick Overview

Swing Gate KitTwin gate kit24v Intensive3500mm or 500kg Max each leafAbove ground Motor110 Degrees Max opening angleMechanically locking motorSpeed 33 seconds 90 DegreesBuilt-In Obstacle Detection

£2,122.31
£1,379.50 Save 35%
VAT included
Spread the cost with finance from 0% interest
Finance options
Found it cheaper? We can price match...
Need this in a hurry? Contact us...
£1,379.50
VAT included

Share on

Product Description

NICE WINGO5024BDKCE-DKIT

Complete kit for a pair of swing gates up to 3.5m or 500kg per gate.

Integrated Open & Close Limits

This equipment features adjustable open and close limits. This allows you to set the gates limits of travel without the need for a physical stop in the ground. This feature has some limitiations and may not function correctly on wider gates. For gates where each leaf is over 2.5m we reccomend a physical stop in the open and close positions.

Quick & Easy Installation

Equipment designed for the quick & easy installation to existing hinged swing gates. Can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board & low voltage cabling to the motors.

Battery Backup Available

Battery backup is available for this motor for in the event of a mains power failure. Electric gates make it particularly difficult to gain access to a property if the mains power fails.

Built in obstacle detection

This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person or a vehicle or an object or even wind obstructing the path of the gate. Although this safety feature can be very effective it is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.

BiDirection

The bidirectional (BD) transmitters will give your customers feedback on reception of the command and information on the status of gate automation by a orange green and red LEDs together with sounds and slight vibrations.

What comes in the box
QuantityItem
2NICE WG5024 24v Swing Gate Motor's
2NICE ON3EBD Two Button Transmitter's
1NICE MC424L Control Panel
1NICE EPM Pair of Photocell's
1NICE OXIBD Receiver
1NICE ELDC Flashing Light
Motor ModelMains Power SupplyMotor VoltageMax Weight per GateMax Length per GateLocking MethodMotorGate SpeedDuty CycleNotesKITSINGLE KIT
NICE WG4000230v230v400kg2000mmMechanically locking motorElectromechanical20 seconds 90 DegreesSemi-intensive
NICE WG4024230v24v400kg2000mmMechanically locking motorElectromechanical18 seconds 90 DegreesIntensive
NICE WG5000230v230v500kg3000mmMechanically locking motorElectromechanical38 seconds 90 DegreesSemi-intensive
NICE WG5024230v24v500kg3000mmMechanically locking motorElectromechanical33 seconds 90 DegreesIntensive

Product Details

Reference WINGO5024BDKCE-DKIT Category Wingo Range Brand Nice

Product Specifics

Shipping Index 1
Discontinued Discontinued
Gate type Swing gate
Single or twin kit Twin gate kit
Max weight per gate 500
Max length per gate 3500
Above or underground Above ground
Max opening angle 110 degrees
Motor Electromechanical
Locking method Mechanically locking motor
Power Supply Voltage 230v
Motor voltage 24v
Gate Speed 33 seconds 90 Degrees
Duty Cycle Intensive
Obstacle Detection Built-In Obstacle Detection
Category Swing Gate Kit

Product Reviews

Product Reviews / Q&A

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
  • Questions & Answers (0)