• -35%
CPS G
  • CPS G

BFT CPS G

CPS G
£246.23 (Includes VAT at 20%) Save 35%
RRP £378.82 (Includes VAT at 20%
  • Foundation box
  • Includes lid
  • Cataphoresis coating
  • For BFT Sub G motors
Quantity

 

Security policy

 

Delivery & Return policy

 

Warranty

Average votes for this product
0 / 5
Average : 0 / 5
Based on 0 customer reviews.

BFT CPS G

Load bearing foundation case for installation of Sub G operators. Release mechanism not supplied.

What comes in the box
QuantityItem
1BFT CPS G Sub G Foundation Box
CPS G

Data sheet

Shipping Index
General
Compatability
For use with BFT Sub G 180 Degrees operators
Motor Range
Sub
Category
Foundation Box

Download

bft cps manual

Download (2.54M)
Submit a site survey
close

Site Survey Form

It is very important when choosing the correct automation that how much wind the gates are subject to is taken into consideration.

Safety edges are used to protect hazard points on an automatic gate. Typically they are installed in gaps of 500mm or less that reduce when the gate operates. They are made to measure and can be wired or wireless.

This is a very important part of the site survey, we cannot confirm the suitability of equipment for an application without firstly checking that the equipment suits the gates hinges and configuartion.
If your gates are not hung yet or do not exist yet then please specify that here:
If you check this box, please try to fill out at least the width and opening angle of the gate below where possible.
Otherwise please proceed with your measurements

Please feel free to upload images of your gates or site as it will greatly assist us in choosing a suitable kit.

This is the first form of its kind for us, so please let us know your thoughts and suggestions!
We would love to hear from you about it,
Thanks, the Metalines team.