Nice electric gate kits

Which Nice family is the right starting point?

• Above-ground swing: TOONA provides linear-operator options; WALKY, HOPP and HYKE families use articulated-arm arrangements. Select against the exact model's gate limits and the space around the post, not simply how the motor looks.
• Underground swing: L-FAB and M-FAB families place the drive below the hinge. Check foundation boxes, releases and linkages as well as the motor, including what the advertised package actually contains.
• Sliding: ROBUS and RUN families serve sideways-moving gates. Gate travel, running resistance, usage and the rack specification all need checking for the particular reference.

To compare mechanisms across brands, see swing kits, underground kits and sliding kits. Use the family name to narrow the choice, then check the exact model against your gate.

WALKY kit, WALKY motor or HOPP replacement?

These are different purchases. For a WALKY package, establish whether you need the single-leaf or twin-leaf version and retain the complete code, including any suffix. For an existing WALKY or HOPP system, identify the installed operator and whether it contains the controller before ordering a drive or board.

For a replacement, use the full label and reference to browse replacement operators or model-specific spare parts. If the label is unclear, send us photographs and any readable reference and we can help identify the right part.

What do BlueBUS and a control-board name tell me?

They help identify the system and its matching accessories. Nice's TOONA 24 V guidance, for example, names specific motors and the MC824H control unit and treats device recognition, gate-position learning and transmitter memorisation as separate steps. Do not assume that a remote pairing instruction also commissions a gate or verifies its safety devices.

For an upgrade, record the installed board, receiver, remote and safety-device references. Check the device interface as well as the Nice brand. For a manual or fault enquiry, the exact board and version matter more than a general search for Nice gate programming.

Are battery backup and phone control included?

Only if the exact package lists them. A 24 V operator is not evidence that a backup battery and charging arrangement are supplied. Check the compatible backup for the controller, its enclosure and the intended operation during a power cut; do not assume a battery named for one Nice system suits another.

For app control, identify the specified interface or gateway, the supported control unit and the network connection available at the gate. A kit supplied with remote-control handsets does not automatically include phone control. Ask about the complete equipment required before comparing package prices.

What else should I check before buying?

Compare motor quantities, controller, radio receiver, remotes, photocells, brackets and releases line by line. Underground boxes, rack, cable, locks or additional protective devices may be separate. Keep high-speed or HS references distinct: a different duty or speed variant is not a universal upgrade for an existing gate.

For a new installation, use our site survey to capture leaf dimensions, hinge/post geometry, opening angle, wind exposure and busy periods. We specify and supply equipment, not site installation. The kit contents must be considered as part of the whole entrance, with assessment and commissioning by the installer.

Find your model

Use the full model and part number, including any suffix, when comparing a new kit, motor or spare with equipment already installed. If the label is unclear, send us a photograph and we can help identify it.

• Walky — replacement motors, parts and spares
• Hopp — replacement motors, parts and spares